Most drivers consider ATV exhaust noise a nuisance. But according to some drivers, ATVs use a lot of energy in their engine, so if it takes out too much sound, the driver can be deafened or seriously injured. This is why drivers should take some measures to keep their ears safe. Doing so avoids any potential danger to themselves or others. One simple way to reduce the noise is using ATV muffler silencers.
Testing Your ATV Noise Level
Before you take action in noise reduction, it is essential to learn how to test the ATV noise level. For this, you can use a decibel meter and observe how high the decibel (dB) level is. If the readings go over 120 dB, it only means it can cause permanent hearing damage and loss of hearing if the sound continues unabated.
ATV Muffler Silencers
Hearing loud noise frequently can cause permanent hearing damage, so consider using ATV muffler silencers. Probably some of you might ask how effective mufflers are. First, you have to understand that the main reason ATVs are so loud is their speed. Not only that but they are also used in rural areas. This is why most racetracks are built in rural areas because a few people will be disturbed. In addition, racing against other ATVs can get very competitive, so drivers have to push their engines past the point where they would usually stop. This way, they can avoid damaging the bike. So why use ATV muffler silencers? Compared to the typical muffler, a silencer can reduce the noise output by up to 50%.
Reducing the ATV Exhaust Noise
If you are looking for other ways on how to reduce the noise of your ATV, here are some tips:
- Start installing one of the best ATV muffler silencers.
Installing a silencer muffler is one of the simplest and most effective ways to get a noticeable quieter exhaust sound. You need an additional muffler and install it to your OEM system as an auxiliary exhaust.
- Once done with the muffler silencer, you can now install a spark arrestor.
Although the primary purpose of spark arrestors is to prevent forest fires, they can also reduce the sound output of your ATVs exhaust system. However, the sound must pass through the steel mesh or baffles to break up the sound waves on their way out of the muffler.
- Make sure to repack your existing silencer.
You may find a fiberglass sound dampening material in some mufflers. This helps reduce the noise in the exhaust. However, since the fiberglass material gets dirty or burns out, it can lose its dampening effect. Therefore, you have to remove the old stuffing and replace it with a new one.
- Don’t forget to fix any exhaust leaks.
Remember that even the tiniest leak or crack can make your louder, so make sure to fix it if you don’t want to use ATV muffler silencers. Although the leak may be hard to spot, you can start at the front and work your way backward.
- Ensure that the damaged or rusted-out stock muffler is replaced.
Since the muffler wears out over time, you have to replace it because of its poor performance. You can change the dampening internals.
- Consider inserting a quiet core insert in the muffler.
Some manufacturers offer quiet core inserts that can be fitted to make the exhaust quieter. Although the designs vary, the common one comes in a baffled or perforated pipe that serves inside the muffler.
- Don’t forget to connect a coil of metal conduit.
If you need to get your exhaust quiet in a hurry, you may consider getting about 6 feet of flexible metal conduit and then connect them to your muffler using a simple clamp. Make sure to coil them up and use some steel wire to keep them in place.
ATVs could be loud, so make sure to install ATV muffler silencers for noise reduction. You may buy available silencers in the market or consider the other tips listed in this article to reduce the noise. What matters most is to take some actions, especially if the ATVs are creating too much noise that can cause damage to your ears.